Tube & Pipe
Alloy & specialist
Copper Nickel 70/30 Tube
The higher-nickel grade where flow rates or chloride temperatures rule out 90/10.
- Grade / spec
- CW354H / C71500
- Size range
- 6–114 mm OD
- Supplied as
- Higher velocity tolerance
- Material
- Copper nickel
- Product family
- Alloy & specialist
- Certification
- Mill test report per lot
Quotes returned within four working hours.
What it is
The higher-nickel grade where flow rates or chloride temperatures rule out 90/10.
Supplied to CW354H / C71500 in copper nickel, and held as part of the standing tube & pipe range.
Sizes and how it ships
Standing size range is 6–114 mm OD, supplied as higher velocity tolerance.
Sawn, drilled and machined to your drawing before despatch. Cut lengths are released against your lot number with the mill certificate attached to the paperwork.
Documentation
Every lot ships with a mill test report covering chemical analysis and mechanical results for the heat supplied, issued against your order and lot number rather than as a generic yearly certificate.
Tell us the spec callout your drawing references and we will confirm conformity in writing before the material leaves the floor.
More from Alloy & specialist
Held alongside this line.
Enquire
Need Copper Nickel 70/30 Tube on a drawing?
Send the sizes and quantities and we will come back with availability, cut charges and a delivery date — usually the same working day.